Need help?Do you have a question about the Badger Meter E Series and is the answer not in the manual?
General| Brand | Badger Meter |
|---|---|
| Model | E Series |
| Category | Measuring Instruments |
| Language | English |
Crucial safety guidelines, including installation compliance and magnetic field warning.
Procedures for inspecting the meter and accessories for shipping damage.
Lists necessary components and firmware versions for proper system operation.
Guidelines for installing the meter in outdoor meter boxes and protecting it from freezing.
Precautions for electrical continuity and grounding during indoor installations.
Details on fittings for proper alignment and electrical continuity.
Key considerations before installation, including piping and grounding.
Detailed step-by-step instructions for physically installing the meter.
Instructions for physically connecting the ORION endpoint to the meter.
Recommendations for choosing an appropriate installation location for the endpoint.
Methods for activating the endpoint, including Smart and IR activation.
Explains the automatic valve activation sequence after endpoint activation.
Methods to verify successful endpoint activation at the installation site.
How to configure weekday call-in times and settings in BEACON.
Selecting valve filters in BEACON to enable valve information display.
Adding the Valve Health module to the BEACON At A Glance dashboard.
Describes the LED colors and their meanings for valve status.
Details the automatic daily valve cycling for maintenance and its logging in BEACON.
Viewing scheduled communication times and signal strength for endpoints.
Accessing and viewing the historical record of valve actuations.
How to schedule valve actuations for the next communication or a specific date.
Steps to schedule a valve to open or close for the next communication or a specific date.
How to cancel a previously scheduled valve actuation.
Explains the temporary increased communication frequency after a valve closes.
Steps to select, schedule, and confirm batch valve actuations.
Confirming scheduled batch valve movements and viewing the status on the meter card.
How to cancel pending batch valve actuations for selected accounts.
Explains the meter's LCD display, status indicators, and their meanings.
How to turn on and navigate the meter's LCD display.
Details display of units, flow rate, direction, and total consumption.
Contact information for obtaining assistance with product issues.
To Next Page