VALVE CONDITIONS
The following chart describes the possible conditions specific to the integrated valve that may be triggered. Exceptions are
communicated to BEACON when connected to an ORION Cellular LTE-M or LTE-MS endpoint.
Integrated Valve
Exceptions
Description
Command Failed
Endpoint sends message saying it cannot complete command. Valve may have reached the desired
position, but settings did not update.
Local Actuation
Valve actuation takes place at the meter site via IR at the valve or endpoint IR port.
Low Battery
Valve battery life is low. Approximately 1 year of battery life remains.
Movement Delay
Scheduled valve movement is delayed. Occurs when excessive flow through the meter delays the
scheduled valve change time. Exception clears automatically when scheduled valve change occurs.
Magnetic Tamper
Valve detects a strong magnetic field. Could cause malfunction by disrupting the positional sensing
feature. Requires attention at meter site to move/remove the magnet.
Movement Error
Valve did not successfully reach desired position. May require attention at meter site.
Replace Battery
Battery life, based on calculated valve usage, is nearing end of life. Approximately 6 months (or less) of
battery life remains. The valve remains in its current position if the battery reaches end of life.
Valve Tamper
Valve disconnected from the endpoint. Requires attention at meter site to resolve.
OTE:N Additional information about the integrated valve is available online in BEACON Help.
Valve Conditions
Page 19 August 2020 ESM-UM-02156-EN-02
To Next Page
Loading...
