Badger Meter Blancett B3000 Series - Electrical Symbols; Service Kit Parts Installation; Replacing the CPU Board

Service Kit Parts Installation
Page 4 June 2018DSY-UM-02582-EN-04
Electrical Symbols
Function
Direct
Current
Alternating
Current
Earth
(Ground)
Protective
Ground
Chassis Ground
Symbol
SERVICE KIT PARTS INSTALLATION
DANGER
REMOVE DEENERGIZE ANY EXTERNAL POWER FROM THE UNIT BEFORE REMOVING
THE SCREW COVER FROM THE ENCLOSURE. FAILURE TO DO SO CAN BE DANGEROUS.
Replacing the CPU Board
Service Kit Number B300-103 for the Explosion-Proof basic monitor contains:
• One programmed, explosion-proof CPU PCB, PN B300014-T
• Four screws, Phillips tri-shank, #4-20 × 1/4, zinc/steel, PN B300113
Service Kit Number B300-104 for the Explosion-Proof advanced monitor contains:
• One programmed, explosion-proof CPU PCB, PN B300017-T
• Four screws, Phillips tri-shank, #4-20 × 1/4, zinc/steel, PN B300113
This procedure applies to both Basic and Advanced Explosion-Proof B3000 models�
1� Grasp the enclosure cover and turn it counter-clockwise until it separates from the
enclosure body� Set the cover aside�
2� Loosen the two thumb screws and slightly turn the circuit board assembly far enough
to access the battery connector�
3.6 VOLTS
+
TADRAN
LITHIUM
INORGANIC
BATTORY
J1
S1
Menu
S4
Enter
S3
Up
S2
Down
COM
1
2
12
1
Thumb Screws
COM
1
2
Total Flow
Reset Key