EasyManuals Logo
Home>Badger Meter>Measuring Instruments>ILR7 Series

Badger Meter ILR7 Series User Manual

Badger Meter ILR7 Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Register operation
Page 4 AC_ILR_BA_02_1632 October 2019
2.4 Flow rate
PER MIN is displayed in conjunction with the unit of measure. All flow rates are calculated in volume unit per minute.
2.5 Battery
The "LBat" indicator will indicate when the battery is approaching end of life. When the indicator is illuminated, the 2/3AA, 3.0
VDC lithium battery is drained to 10% of its total capacity and should be changed. Normal battery life is five years.
NOTE: A 2/3AA, 3.6 VDC battery may also be used as a replacement.
Low battery indicator
2.6 Checksum
To display the firmware checksum, press and hold the RESET button for three seconds. To return to normal display, release
the RESET button.
2.7 Display scale factor
To display the scale factor:
At the same time, press and hold the TOTAL and RESET buttons for two seconds to display the programmed scale factor. To
return to the normal display, release both buttons.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Badger Meter ILR7 Series and is the answer not in the manual?

Badger Meter ILR7 Series Specifications

General IconGeneral
BrandBadger Meter
ModelILR7 Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals