BaehrTec A2000 operating instructions
English – V101 - effective 10/13
For more information, please refer to the previous section.
Suction level
The suction level you have selected will be shown to you here as text and as a bar graph.
In the bar graph, you will also see whether the suction is currently activated or
deactivated.
For more information, please refer to the previous section.
Filter control
As soon as the pores of the dust bag become blocked (dust bag is full) this will be shown
to you in the display using the filter-control symbol. In such a case, you must replace the
dust bag. For information on how to change the dust bag, please refer to the section
“Changing the dust bag”.
Service control
The BaehrTec A2000 has a service interval display. The service interval is 905 hours, and
refers to the operating hours of the handpiece motor as of the delivery/the last service. As
soon as the service key lights up on the display (or within 24 months; this time interval is
not shown to you by the device) you must send in your device for service in order to
prevent elaborate and costly repairs and to comply with your medical device’s inspection
requirements in accordance with VDE 0751-1.
The service interval is actually 900 hours. But as your device already has
meter readings at the time of delivery, as described in the following
section, we have incorporated a buffer of 5 hours for you.
Foot pedal
As soon as the optionally available foot pedal is connected, this symbol will appear on
the display.
4.5.2 Set-up mode (options menu)
In the “Set-up mode” you can change settings and retrieve information about your device. As
soon as you turn on your device, you will automatically be in “Work mode”. Then, in order to
exit work mode and reach the options menu, please press the button (18).
For your own safety, it is only possible to exit from the work area and
switch to the options menu when the handpiece motor is turned off.
While scrolling through within a menu level, if you press buttons (14)
and (15), it takes about half a second for the next menu item to be
selected. This ensures that you have enough time to get a look at the
choices.
Unlike the settings you make in work mode (except memory functions),
the settings you make in the options menu will remain even after
switching off the device.
To Next Page
Loading...
