BaehrTec A2000 operating instructions
English – V101 - effective 10/13
Fig. 16
6)
Place the dust bag lid back on the controller (see section “Disconnecting/connecting
the dust bag lid to the controller”).
4.9.3
Changing the filter cassette
You must change the turbine protection filter and all other filters if you have installed a
new dust bag and the symbol for a dust bag change still lights up. You should also
change the turbine protection filter and the other filters if you believe that the symbol for a
dust bag change has lit up too early after successfully changing the dust bag. In principle,
we recommend changing the filter cassette regularly, and at least every four weeks.
To change the filter cassette, please proceed as follows:
1) Turn off the device at the main switch and disconnect it from the power supply.
2) The filter cassette can be released from the device by turning both knurled screws
(44) anti-clockwise until the filter cassette easily comes away from the back of the
device.
To Next Page
Loading...
