BaehrTec A2000 operating instructions
English – V101 - effective 10/13
2.1.2
2.1.2 Nameplate with performance figures
Fig. 1
BaehrTec A2000
CE sign (Communauté Européenne) with the number of the certification authority. A
product bearing this label fulfils the requirements of the corresponding EU guideline (the
applicable European Standard).
Application part of type B
This application part guarantees protection against electric shock due to the compliance
of the leakage currents with standards (Type B).
Before first using the device, it is essential to read and follow the operating instructions.
Electrical/electronic waste. Devices with this label must be disposed of properly and must
not be put in household waste.
This symbol provides information about which fuse(s) is/are used in the device.
Protection class II
This is a device of protection class II with functional earthing.
ON (max) / OFF (min)
Indicates how the device should be operated.
The following applies to the device:
Operating time: 15 min (maximum) Break time: 10 min
(minimum)
These permitted operating times correspond to the usual working method in the
podiatry/chiropody sector.
To Next Page
Loading...
