Baehr TEC A2000 - Page 37

BaehrTec A2000 operating instructions
English – V101 - effective 10/13
Page 37/58
Fig. 17
3) Remove the filter cassette (43) and clean the exhaust duct on the controller using
Baehr cloths Art. No. 11000.
4) Remove the knurled screws from the filter cassette and open it by pulling the filter
cassette grille from the base of the filter cassette. Pull the filter cassette grille straight
upwards and out, so that the bolts that connect the filter cassette grille with the base
of the filter cassette do not break.
Fig. 18