Baehr TEC A2000 - Page 51

BaehrTec A2000 operating instructions
English – V101 - effective 10/13
Page 51/58
Take the nine dampers for the handpiece case from the slots on the handpiece motor (possibly
using a pair of tweezers) and dispose of these properly.
Fig. 33
Now reinsert the new dampers for the handpiece case. Make sure that you insert the
three black dampers in the middle row.
Insert the six green dampers in the outer storage rows. Press all of the dampers once
again afterwards.
Fig. 34
Now screw the handpiece case back onto the handpiece cap.
Fig. 35