BAFANG C966 - Other Functions; Known Error Messages

CE ORIGINAL MANUAL LACROS BAFANG LCD DISPLAY
VERSION CE 1.2 EN
6
2. Other functions
Known error messages
In the event of a fault, an error message will appear with the
associated error code. Do not use the bicycle and contact Shinga
as soon as possible.
03: Brake (cable) error (Contact your Shinga dealer)
04: Throttle error (Contact your Shinga dealer)
05: Throttle error (Contact your Shinga dealer)
06: Low battery voltage (Check your battery and charger connection)
07: High battery voltage (Contact your Shinga dealer)
08: Motor error (hall signal cable) (Contact your Shinga dealer)
09: Motor error (phase cable) (Contact your Shinga dealer)
11: Sensor error (controller temp.) (Contact your Shinga dealer)
12: Sensor error (current) (Contact your Shinga dealer)
13: Battery error (Check if your battery is not too hot)
21: Sensor error (speed) (Contact your Shinga dealer)
22: Battery error (BMS) (Replace battery)
30: Communication error (Controller) (Contact your Shinga dealer)