8
DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press
to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press
for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press
for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
To Next Page
Loading...
