7
BF-UM-C-DP C244-EN July 2022
USER MANUAL FOR DISPLAY
7.6.6 Battery Capacity Indication
The percentage of current battery capacity
and total capacity is displayed from 100% to
0% according to the actual capacity.
7.6.7 USB Charge Function
When the HMI is off, insert the USB device
to the USB charging port on the HMI, and
then turn on HMI to charge. When the HMI
is on, it can direct charge for USB device. the
maximum charging voltage is 5V and the
maximum charging current is 500mA.
7.6.8 Bluetooth Function
Note: Only DP C245.CAN is the Bluetooth
version.
DP C245 equipped with Bluetooth 5.1 can
be connected to the Bafang Go+ APP.
This display can be connected to the SIGMA
heartbeat band and shows it on display, and
can also send data to the mobile phone.
The data that can be sent to the mobile
phone are as follow:
No. Function
1 Speed
2 Battery capacity
3 Support level
4 Battery info.
5 Sensor signal
6 Remaining distance
7 Energy consumption
System part info.
9 Current
10 Heartbeat
11 Single distance
12 Total distance
13 Headlight status
14 Error code
(Bafang Go+ for Android
TM
and iOS
TM
)
To Next Page
Loading...
Need help?
General
