9
BF-UM-C-DP C244-EN July 2022
USER MANUAL FOR DISPLAY
Note: “OFF” means light sensor is off. Level
1 is the weakest sensitivity and level 5 is the
strongest sensitivity.
7.7.1.5 “TRIP Reset” Set reset function for
single-trip
Briefly press or to select “TRIP
Reset”, and briefly press to enter into the
item. Then select “NO”/“YES” (“YES”- to
clear, “NO”-no operation) with the or
button. Once you have chosen your
desired selection, press the button
(<0.5S) to save and exit back to the "Setting"
interface.
Note: The riding time(TIME), average speed
(AVG) and maximum speed (MAXS) will be
reset simultaneously when you reset TRIP.
7.7.1.6 “Service” Turn on/off the Service
indication
Briefly press or to select “Service”,
and briefly press to enter into the item.
Then select “OFF”/“ON” (“ON” means
Service indication is on; “OFF” means Service
indication is off) with the or button.
Once you have chosen your desired
selection, press the button (<0.5S) to
save and exit back to the "Setting" interface.
Note: The default setting is OFF. If the ODO
is more than 5000 km, the "Service" indica-
tion and mileage indication will flash for 4S.
7.7.2 "Information"
After the HMI powered on, press and hold
and to enter into the setting
function. Briefly press (<0.5S) or to
select "Information" and then briefly press
(<0.5S) to confirm.
Note: All information here cannot be changed, it is
to be viewed only.
7.7.2.1 “Wheel Size”
After entering the "Information" page, you
can see "Wheel Size --Inch" directly.
7.7.2.2 “Speed Limit”
After entering the "Information" page, you
can see "Speed Limit --km/h" directly.
7.7.2.3 “Battery Info”
Briefly press or to select “Battery
Info”, and briefly press to enter, then
briefly press or to view the battery
data (b01 → b04 → b06 → b07 → b08 → b09
To Next Page
Loading...
Need help?
General
