USB to Serial Adapter User’s Manual 10
5.5 Windows
®
2000 Driver Installation
Follow the steps below to install Windows
®
2000 driver:
5.5.1 Power on your computer and make sure that the USB port is enabled
and working properly.
5.5.2 Insert the USB-Serial adapter software driver into the CD-ROM drive
and Plug in the USB-Serial adapter into the USB port, Windows will
run the Found New Hardware Wizard to assist you in setting up the
new device. Click “Next” to continue.
5.5.3 Select Search for a suitable driver for my device (recommend)
and click “NEXT” to continue.
To Next Page
Loading...