Bafo BF-810 - Windows XP Driver Installation

USB to Serial Adapter User’s Manual 14
5.7 Windows
®
XP Driver Installation
Follow the steps below to install Windows
®
XP driver:
5.7.1 Power on your computer and make sure that the USB port is enabled
and working properly.
5.7.2 Insert the driver of USB-Serial adapter into CD-ROM drive and plug
in the USB-Serial adapter into the USB port, the “Found New
Hardware Wizard” will to assist you to setting up the new device.
5.7.3 Select the “Install the software automatically (Recommended)”
then click “Next” to continue.
5.7.4 The windows will auto detect the device (prolific USB-to-Serial
Comm Port) and install the driver into your system.