USB to Serial Adapter User’s Manual 3
5.5. Driver Installation Driver Installation
5.1 Windows
®
98 Driver Installation
Following the steps below to install Windows
®
98 driver
5.1.1 Power on your computer and make sure that the USB port is enabled
and working properly.
5.1.2 Plug in the USB-Serial adapter into the USB port and run the Add
New Hardware Wizard to assist you in setting up the new device.
Click “Next” to continue.
5.1.3 Select “Search for the best driver for your device
(Recommended)”, then click “Next” to continue.
To Next Page
Loading...