60
SOLAR DUAL BATTERY CHARGER
maintenance
The power supply must always be disconnected
before performing any maintenance work. Any
light should be prevented from being cast upon
the panel(s). Therefore you should completely
cover the panel(s) before attempting any
maintenance. Clean the device with a dry, lint-
free cloth.
repairS
Do not repair or modify the device. Please
contact your Bailey retailer.
The below are not suitable for charging:
• 6V batteries or 6V lead accumulators
• Non-rechargeable batteries
• Nickel-cadmium batteries
If batteries with a rated voltage of 6V
are charged with the device, gassing
occurs immediately. An explosive gas
may be created.
The device is only suitable for regulating solar
modules. Do not connect any other voltage
sources (e.g. main voltage 230V) to the device.
This may destroy the device and/or sources.
Further information can be found on the Truma
website: www.truma.com.
To Next Page
Loading...
