EasyManua.ls Logo

Bailey Pegasus GT65 - Water Heater Diagnostic Screens

Default Icon
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
THECONTROLPANELS
ContactWhaleHeaterSupporton+44(0)845
2172933.
Water Heater Diagnostic Screens,
Checkgassupply
Make sure there is gas in the bottle and no
blockage in the gas line. At temperatures
below5°Cusepropaneratherthanbutane.
Press“Retry”oncethechecksarecomplete.
Ifthereisaproblemwiththegassupplythat
cannotbe dealt with immediately, selectthe
electriconlyheatingoptionsinstead.
Checkwatersupply
Theheaterisn’tcompletelyfullofwater.Run
the pump with one hot tap open until water
ows smoothly out of the tap. Wait at least
5 minutes to allow the heater to ll before
pressing“retry”.
Checkvoltagesupply
Ensure voltage is above 12v and below 15v.
Thiscanbedonebyrechargingthebattery.

Table of Contents

Other manuals for Bailey Pegasus GT65

Related product manuals