Baintech PowerTop User Operation Manual V8 10
Load Connection
IMPORTANT NOTE: DC On/Off switch must be ON for load connections.
The Grey Anderson connector load output is protected by a 50A self-resettable thermal breaker. Maximum
recommended load as a guide is under 500W, dependent on ambient temperature.
Loads can also be connected to the following sockets:
LockOn Maximum load/Socket 10A
The Baintech LockOn socket system is designed to ensure your gear such as fridges stays connected on the roughest
trips. It’s easy to use – simply turn the plug clockwise and the locking mechanism engages, ensuring all your essential
gear can stay connected, even on the roughest treks. The connection is also water resistant with an o-ring ensuring
uninterrupted power.
Engel Maximum load/Socket 10A
Ciga x 2 Maximum load/Socket 10A
USB Maximum load/Socket 2.3A
Sockets output are protected by a 20A self-resettable thermal breaker. Maximum recommended load across all
sockets as a guide is 200W, dependent on ambient temperature.
To Next Page
Loading...
