8
LIBRA - installation
LIBRA FREESTANDING
INSTALLATION INSTRUCTIONS
1 800 463.2187 Monday to Thursday from 8 a.m. to 6 p.m. (EST)
.
Friday from 8 a.m. to 5 p.m. (EST)
Printed in Canada. Copyright © August 2021 Bains Ultra Inc. All rights reserved. 45200682
SITE PREPARATION
There is a technical specification sheet for each BainUltra
®
ThermoMasseur
®
which includes information such as necessary
dimensions of site before installation. If you do not already have the technical specifications, download it from the BainUltra
®
Website at: bainultra.com or call us at: 1 800 463-2187.
FLOOR
1500 LB
(680 KG)
PLUMBING
• See faucet manufacturer’s specifications for zoning and plan water supply location accordingly.
• Position drain according to bath’s technical specifications.
• Leave access to Geysair junction hose.
WARNING
• Libra freestanding bath cannot be drilled for faucet installation.
Faucets must be freestanding or wall-mounted models.
BEDDING
Before installing, ensure that the floor underneath the bath
can support 1500 lb (680 kg). No special bedding installation
is recommended by manufacturer, the bathtub can sit directly
on the floor.
If the bath is installed on the ground floor or basement (concrete
slab), the opening under the bath must be airtight to avoid
condensation.
To Next Page
Loading...