EasyManuals Logo

Bajaj Pulsar 150 DTS-i User Manual

Bajaj Pulsar 150 DTS-i
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
18
Front Brake Fluid Level
Front brake fluid master cylinder reservoir is located
near RH switch on handle bar.
To check oil level, keep the vehicle on Centre stand
with handle bar in straight ahead position.
Always ensure that brake fluid level is above ‘MIN’
mark given on inspection window.
Use only DOT 3 or DOT 4 brake fluid (from sealed
container) to top up if required.
It is advisable that brake fluid should be replenished at
evert 30,000 Kms or once in two years which ever
occurs earlier.
Monsoon Care :
It is suggested to customer to take appropriate care
in area of heavy monsoon or high rainfall area. The
appropriate surface preventive coat to avoid rusting /
poor surface finish on account of adverse
atmospheric conditions.
Vehicle cleaning to be done with soft & clean wet
cloth to avoid scratches on painted parts.
Clean & lubricate all the important parts as detailed
in a periodic maintenance chart.
Do not apply direct water jet on painted, electrical /
electronic parts.
Do not obstruct engine cooling by adding mud
protection sheet from front.
General Maintenance Information

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bajaj Pulsar 150 DTS-i and is the answer not in the manual?

Bajaj Pulsar 150 DTS-i Specifications

General IconGeneral
BrandBajaj
ModelPulsar 150 DTS-i
CategoryMotorcycle
LanguageEnglish

Related product manuals