EasyManua.ls Logo

Bajaj pulsar F250 - MOBILE CHARGER

Bajaj pulsar F250
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPEEDOMETER SETTING / MOBILE CHARGER
The mobile charger will supply output voltage only in
engine running condition.
Customer to use suitable USB cable for mobile charging.
Caution:
Do not use mobile phone while driving. Momentary
lapse in concentration might result in an accident.
Charger Cap
Charging Socket
Mobile Charger
Mobile charging socket has been provided on fuel tank cover
The charger socket has been provided with cap to protect
charger socket from dust & water entry during washing /
during rain.
Always ensure charger cap is rmly tted on socket when
charger socket is not in use.
16
Press mode & set
button together for
more than 3 sec.
‘:’ stops blinking
Digits HH starts blinking.
Press set button for
1 sec.
HH value will be stored
while MM starts blinking.
HH value will be stored
while MM starts blinking.
Press mode button for
1 sec.
Minute digits will
increase.
Press set button for
1 sec.
HH and MM value will be
stored & AM starts blinking

Related product manuals