A. High/Low Beam Switch: When headlight is ON,
High or Low beam can be selected with this
switch. Hi beam indicator light located on Speedo
console will light up when high beam is selected.
: High Beam : Low beam
B. Turn Signal Switch: When the turn signal knob is
turned to Left ( ) or Right ( ) respective
indicator will start blinking, to stop blinking push
the knob in & release.
C. Horn Button ( ): Press button for sounding horn.
16
D. Pass Switch : Press the switch to put ‘ON’ Hi Beam.
It is used to give signal to vehicles coming from opposite
side while overtaking.
To Next Page
Loading...
