BALLANTINE LABORATORIES, Inc. MODEL 3207 MICRO-OHM METER
14
1.5 Optional Accessories Available
No.
Test Lead Type Intended Use
1
“C” clamp probe assembly
with 10 meter long lead
To measure resistance of copper wires (having big
diameter), copper bars, copper/ carbon rods etc.
(P/N 85-60198-1)
2
Heavy Duty Bond testing
probe assembly
To measure resistance of copper bars, carbon rods
solid metals etc. (P/N 85-10314-0)
3
Test Lead with Gold Plated
Alligator clip
To measure resistance of transformer winding,
Barrater resistor, contact resistance of relay, LT
switch gear contact resistance. (P/N 85-60288-0)
4
Test lead with Heavy Duty
Alligator clip.
This lead is useful to measure resistance of
transformer winding, coils, motor winding, copper
foils etc. (P/N 85-60199-1)
5
Test Lead with Gold Plated
Kelvin Clip
To measure small size resistors. To measure
resistance of transformer winding, coils, inductors
etc. (P/N 85-60197-0)
1.6 Accessory supplied with Instrument
No.
Accessory Intended Use / Part Number
1 RS 232 Cable To interface with computer
2 AC Mains Power Cable P/N 33-10000-0
3 Manual P/N 90-10353-5
For connections refer to the setup diagram in Section 7.
To Next Page
Loading...
