BALLANTINE LABORATORIES, Inc. MODEL 3207 MICRO-OHM METER
17
SECTION 2
SAFETY INFORMATION
2.1 Safety requirements
• ALWAYS observe the safety consideration and cautions. Read and understand manual
for operational and safety considerations.
• Always inspect your Micro ohmmeter, test leads, mains cable and accessories for any
sign of damage or abnormality before every use. If any abnormal condition exists (i.e.
broken or damaged test leads, mains cable, cracked case, display not reading etc.) do
not attempt to take any measurements, as this may cause malfunction.
• Never touch exposed wiring, connections, test leads tips or any live circuit conductors
when attempting to make measurements.
2.2 Safety Symbol and Terms:
• Indicates read the Instruction Manual carefully before operating the instrument to
avoid damage to the instrument as well as injury to the operators.
Terms :
• The WARNING heading used in this manual indicates precautions to be followed in order
to avoid injury or fatalities to the person. Always review the associated information very
carefully before performing the indicated procedure.
• The CAUTION heading used in this manual indicates precautions to be followed in order
to avoid injury/ damage to the instrument. Such damage may invalidate the warranty.
• The NOTE heading in this manual states the important information to the user.
To Next Page
Loading...