BALLANTINE LABORATORIES, Inc. MODEL 3207 MICRO-OHM METER
7
TABLE OF CONTENTS Page No.
Unpacking & Initial Inspection 9
SECTION 1 GENERAL INFORMATION 11
1.1 Introduction 11
1.2 Features 11
1.3 Applications 11
1.4 Controls , indicators & terminals 13
1.5 Optional Accessories 14
1.7 OPTIONS 15
SECTION 2 SAFETY INFORMATION 17
2.1 Safety Requirements 17
2.2 Safety symbols & terms 17
2.3 Warning 18
2.4 Caution 18
SECTION 3 PREPARATION FOR OPERATION 19
3.1 Installation 19
3.2 Power requirement 19
3.3 Bench Mounting 20
3.4 Using Test Leads 21
3.5 Zeroing the Instrument 21
3.6 Pulse mode operation 21
3.7 Continuous mode operation 22
3.8 Precaution to be taken for various types of measurement 22
SECTION 4 MAKING MEASUREMENTS 24
4.1 Making Measurement 24
4.2 Computer Interfacing 26
SECTION 5 CARE AND MAINTENANCE 28
5.1 Care & Maintenance 28
5.2 Replacing the Fuse 28
5.3 General Maintenance 29
5.4 Reshipment 29
SECTION 6 SPECIFICATIONS 30
6.1 Electrical Specification 30
6.2 Environmental Specification 30
6.3 General specification 30
SECTION 7 OPTIONAL ACCESSORIES 32
ATTACHMENT – CALIBRATION FORM 35
To Next Page
Loading...
