Balluff BTL5-E10 series User Manual

814511/0108
BTL5-A/C/E/G1_-M/U_ _ _ _-K-SR 32/K_ _
Technische Beschreibung
Betriebsanleitung
Technical Description
User's Guide
Descriptif technique
Notice de d'utilisation
Specifiche tecniche
Manuale d'uso
Descripción técnica
Manual de instrucciones
deutsch
english
français
italiano
español
Balluff GmbH
Schurwaldstraße 9
73765 Neuhausen a.d.F.
Deutschland
Telefon +49 (0) 71 58/1 73-0
Telefax +49 (0) 71 58/50 10
Servicehotline +49 (0) 71 58/1 73-3 70
E-Mail: balluff@balluff.de
http://www.balluff.dehttp://www.balluff.de
http://www.balluff.dehttp://www.balluff.de
http://www.balluff.de

Balluff BTL5-E10 series Specifications

General

Type	Magnetostrictive Linear Position Transducer
Operating voltage Ub	10...30 VDC
Protection Class	IP67
Operating Temperature	-40...+85 °C
Output Signal	Analog
Analog Output	0...10 V
Linearity Error	±0.02% F.S.
Resolution	≤ 1 μm
Connection	Connector (M12, M16, 7/8")

Summary

Safety Advisory

Proper application

Details the intended use of the BTL5 Micropulse transducer within a position measuring system.

Qualified personnel

States that the guide is for specialized personnel performing installation and setup.

Use and inspection

Emphasizes following safety regulations and ensuring no hazards result from system defects.

Installation

Mounting

Transducer, Installation

Details transducer installation dimensions, sealing, and mounting requirements.

Magnets, Installation

Wiring

Wiring

Provides wiring diagrams and pin assignments for connecting the transducer to a processor/controller.

Start-up

Check connections

Advises double-checking electrical connections before applying power to prevent damage.

Set null and span

Describes how to adjust the zero and endpoint using internal potentiometers.

Turning on the system

Check output values

Fault conditions

Technical Data

Dimensions, weights, ambient conditions

Supply voltage (external)

Outputs