Need help?Do you have a question about the Balluff BTL7-S5 B-M Series and is the answer not in the manual?
General| Series | BTL7-S5 B-M |
|---|---|
| Category | Transducer |
| Protection Class | IP67 |
| Output Signal | Analog, Current or Voltage (depending on model) |
| Repeatability | ±1 μm |
| Operating Voltage | 10-30 VDC |
| Housing Material | Aluminum |
| Electrical Connection | Connector (depending on model) |
Defines the proper application and conditions for the Micropulse Transducer.
Provides essential safety guidelines for operating the position measuring system.
Details the meaning and structure of warning symbols and signal words.
Explains the physical components and electrical connection of the transducer.
Describes how the magnet and waveguide interact to measure position.
Provides instructions for mounting the transducer in different material environments.
Details the process of installing the transducer, including thread and magnet placement.
Explains pin assignments for various connector types (S32, S115, S140, S147).
Outlines the procedure and safety precautions for system startup.
Provides essential guidelines for regular operation and maintenance.
Explains the Synchronous Serial Interface and data transfer mechanisms.
Introduces the PC software for configuring the BTL7-S510(B)-... transducer.
Lists available settings for output functions, characteristic curves, and magnet configurations.
Provides detailed accuracy, non-linearity, and hysteresis values.
To Next Page