Need help?Do you have a question about the Balluff BTL7-A Series and is the answer not in the manual?
General| Protection Class | IP67 |
|---|---|
| Operating Temperature | -20°C to +70°C |
| Housing material | Aluminum or stainless steel |
| Resolution | Up to 1 μm |
| Type | Magnetostrictive |
| Output Signal | Analog, SSI |
| Connection | Connector, Cable |
Defines the product's specific purpose and limitations as a position measuring system.
Provides general safety guidelines for the position measuring system installation and operation.
Explains how the Micropulse transducer operates internally using ultrasonic waves.
General principles for installing the transducer in various material types and mounting scenarios.
Detailed steps for physical installation, including interference prevention and securing the unit.
Information on wiring the transducer, including pin assignments for various connector types.
Guidelines for EMC compliance, grounding, and proper cable management for optimal performance.
Steps for system initialization, initial checks, and setting adjustable parameters.
Overview of different calibration methods including teach-in, adjusting, online setting, and selection.
Detailed step-by-step guide for calibrating the transducer using the teach-in method.
To Next Page
