Need help?Do you have a question about the Balluff BTL7-E570 Series and is the answer not in the manual?
General| Brand | Balluff |
|---|---|
| Model | BTL7-E570 Series |
| Category | Transducer |
| Language | English |
Guidance on understanding and heeding hazard signals, signal words, and warning structures.
Defines the product's designated purpose, especially in hazardous areas.
Essential precautions and actions to prevent hazards to persons and equipment.
Guidelines for proper usage, inspection, and maintenance of the device.
Instructions for the correct assembly, installation, and initial setup of the device.
Procedures and requirements for maintaining, inspecting, and repairing the product.
Description of the physical components and build of the magnetostrictive linear position sensor.
Explanation of the operating principle and how the sensor measures position.
Installation guidelines for using the sensor outside of Zone 0 hazardous areas.
Detailed steps for physically installing the sensor, including housing and connections.
Specific installation instructions for fill level measurement applications in Zone 0.
Procedure for installing the float and securing it for accurate measurement.
Instructions on how to safely replace the internal electronics module.
Details on wiring the sensor, including pin assignments and conductor requirements.
Guidelines for proper shielding, grounding, and routing of cables for EMC and safety.
To Next Page
