Need help?Do you have a question about the B&G HERCULES and is the answer not in the manual?
General| Brand | B&G |
|---|---|
| Model | HERCULES |
| Category | Lighting Equipment |
| Language | English |
Details on data usage for product features and potential charges.
Provides links for latest documentation and supported languages.
Guide to downloading and using the B&G mobile app for connection.
Locate IP address using the B&G app on a connected mobile device.
Steps to access Ethernet settings for IP address display.
View IP address on a compatible display or multi-function display (MFD).
Lists tasks for initial system setup and data sensor checking.
Overview of key readings, sailing data, and sensor statuses.
Access corrections, targets, inputs/outputs, and HV display settings.
Manage network, software version, preferences, and data recording.
Initial setup and device security tasks to be performed before going to sea.
Sea trial procedures for calibrating speed, compass, and wind sensors.
Overview of core sensors, readings, and data validity.
Monitor recordings, system CPU/N2K load, and upload status.
Indicates the status of the internet connection for data uploads.
Select categories to display calculated and measured sailing data.
Change sensor sources and view readings.
Apply settings and adjust offsets for selected sensor sources.
Adjust true wind angle based on true wind angle and speed.
Adjust true wind speed based on true wind angle and speed.
Adjust boat speed based on heel angle.
Define target boat speed as a function of true wind angle.
Select and apply predefined correction tables or polar sets.
Modify existing or create new correction tables and polar data.
Search and upload pre-written polar tables from a connected device.
Set up and use the countdown race timer.
Record start line ends and view distances and bias.
Set up automatic recording triggers and synchronize with race timer.
Manually start, pause, and save recorded sailing data.
Details the data recorded by default at 1 Hz sampling rate.
Access advanced recording features, typically requiring a microSD card.
Use predefined profiles to record specific sets of sensor outputs.
Define and save custom recording profiles with selected data types.
Place time-stamped markers within recorded data for events.
View, upload, or export recorded sailing data files.
Permanently remove recorded data files from the sailing processor.
Configure analog and pulse channels for various sensors.
Manually define parameters for custom sensor types.
Set up serial ports, baud rates, and data sentences for sensors.
Wiring diagrams for 5V and 12V analog sensors.
Wiring for 213 mast head and speed/temperature sensors.
Wiring diagram for the WS700 series wind sensor.
Wiring instructions for connecting alarm sirens or lights.
Configure alarms triggered by events on a multi-function display.
Configure alarms triggered by the Man Overboard (MOB) button.
Adjust display name, group, backlight, mode, and data values.
Download and install software updates directly to the Hercules unit.
Install software updates using a downloaded file from a mobile device.
Download and install software updates for the Hercules Expansion module.
To Next Page
