Bandit 2290 - Hydraulic Components; Feed Relief Block and Auto Feed Valve

Bandit
129Copyright 8/19
MODEL 2290 HYDRAULIC COMPONENTS
TOP & BOTTOM FEED RELIEF BLOCK
Hydraulic Hose To Tank
Hydraulic Hose From Pump
“AUTO FEED PLUS” VALVE (DUAL SOLENOID)
Torque Retainer Nut to a maximum of 4 to 6 ft.-lbs. and install Loctite 243 (blue).
Over torque will cause damage and will also void warranty.
LOCATION PART NUMBER DESCRIPTION
LOCATION PART NUMBER DESCRIPTION
Parts may not be exactly as shown.NOTICE
1. N/A Main Relief Block Only
2. 900-3909-05 Main Relief Only
1. 900-3920-20 Retainer Nut
2. 900-2909-55 Herschman Connector Only
3 a. 900-3983-35 24 Volt Solenoid Only
b. 900-3983-36 12 Volt Solenoid Only
4 a. 900-3979-02 24 Volt Solenoid Assembly (Includes #’s 1,3a,4, & 6)
b. 900-3982-41 12 Volt Solenoid Assembly (Includes #’s 1,3b,4, & 6)
5. 900-3918-38 Autofeed Plus Relief Block Subplate
6. 900-3915-44 Seal Kit (Not Shown)
7. 900-3920-20 Nut & Sealing O-Ring (Not Shown)
8. 900-4926-20 1/4” - 20 x 1 3/4” SHCS (Not Shown)
9. 900-4926-31 1/4” Lock Washer (Not Shown)