Bandit 2290 - Page 30

Bandit
INSERT
Copyright 12/20
OPERATION
1. Stopfeedingmaterial.
2. Allow the machine to clear out any remaining
material.
3. Makesurethetopfeedwheelisinthelowered
position.
4. Throttlethemachinedown.
5. Disengagetheclutch.
6. Waitforthechipperdrumordisctocometoa
completestop.
SHUT DOWN
7. Shuttheengineo󰀨.
8. Removethekey,andmakesureitstaysinyour
possession.
9. Allowthemachinetocooldown
10. Removealldebris,woodchips,sawdust,leaves,
etc.fromthemachine.
11. Iftransportingthemachine,followthetransport
procedures.
MACHINE OPERATION
NOTICE
 Chippersare not designed to cut chunk wood,
dimensionallumberincludingrailroadties,orend
cutlogsstandingonend.Chipperknivescomingin
contactwith aat surface puts an extremeshock
loadonthechipperdrumordisccomponentsand
bearings.Thiscancausedamagetothemachine
thatwillnotbecoveredunderwarranty.