[ATPS] A client connected to server[<server_id>]
con_id:<x>,seed,tcp,address:xxx.xxx.xxx.xxx,port:<x>,
socket:<x> (response format refer to section 4.8 ATPI)
Fail
[ATPS] ERROR:<error_no>
1: wrong number of parameters
2: Local Port range error
3: Error creating con_id
4: Error creating server task
5: Error creating socket
6: Failed to set socket parameters
7: bind error
8: listen error
9: tcp server already exists
10: Error in accept
11: Error creating seed con_id
12: udpserver already exists
13: Server cannot be created in transparent transmission mode
14: Unknown connection method
15: Failed to listen socket
16: server certificate malloc failed
17: server key malloc failed
18: x509_crt_parse failed for server certificate
19: x509_crt_parse failed for server ca list
20: pk_parse_key failed for server key
21: hang node failed for ssl server
22: accept error for ssl server
23: malloc failed for ssl seed
24: initialization failed for ssl context
25: ssl_set_own_cert error
26: ssl handshake failed for ssl seed
27: create node failed for ssl seed
To Next Page
Loading...