b&t RTL8720D - Page 16

中山市博安通通信技术有限公司
ZHONGSHAN B&T TECHNOLOGYCo., Ltd
Page 16 of 34
After the client is connected
[ATPS] A client connected to server[1]
con_id:3,seed,tcp,address:192.168.20.112,port:52451,socket:2
# ATPI
con_id:1,server,tcp,address:192.168.20.115,port:4004,socket:0
con_id:3,seed,tcp,address:192.168.20.112,port:52451,socket:2
con_id:2,server,udp,address:192.168.20.115,port:4005,socket:1
[ATPI] OK
4.2 ATPC-create a TCP/UDP/SSL client
ATPC =<mode>,< Remote Addr>,< Remote Port>[,<Local Port>]
Description
Create a TCP, UDP, or SSL client
Response
Success
[ATPC] OK
[ATPC] con_id=x (x=[1,9], con_id 0 is reserved)
Fail
[ATPC] ERROR:<error_no>
Parameter
mod:
0:TCP
1:UDP
2:SSL
Remote Addr: The server IP to be connected
Remote Port: The server
port to be connected (1 to
65535)
Local Port: the Local Port
number (1 to 65535)