1: wrong number of parameters
2: The remote IP is malformed or cannot be connected
3: Remote Port range error
4: Error creating con_id
5: Error creating client task
6: Remote address conversion error
7: Error creating socket
8: hang tcp connection failed
9: connect error for tcp client
10: ang node error for udp client
11: local port should be 1~65535
12: bind local port error
13: connection already exists for TT (transparent transmission) mode
14: set broadcast on socket failed
15: set multicast add membership on socket failed
16: set multicast interface failed
17: connection type is unknown (SSL isn’t supported)
To Next Page
Loading...