Figure 6. Windows Network Properties settings screen
Important: Any model of DXM may connect to the configuration software regardless of which device model
is selected in the configuration software. Compatibility is checked before configuration files are uploaded to
the device.
For more information on the device registers and port settings of the DXMR90-4K IO-Link Master, refer to the DXMR90-4K
IO-Link Master Device Register Map (p/n 229732).
Modify Multiple Registers
Modify a range of registers from the Local Registers > Local Registers in Use > Modify Multiple Registers screen.
Select which parameter fields to modify. Most parameters have three selections.
• Unchanged—no changes
• Default—change to default settings
• Set—modify parameter. Other selections will appear based on the parameter.
Figure 7. Modify Multiple Registers screen
1. Enter the Starting register and Ending register.
2. Select the value to change using the drop-down list next to each value.
3. Enter the new value in the field provided.
4. To push register values to the web server, set Cloud Permissions to read.
DXMR90-4K IO-Link Master
www.bannerengineering.com - Tel: + 1 888 373 6767 11
To Next Page
Loading...
