Baofeng BF-H6 - VFO Frequency Mode; Direct Frequency Input

PORTABLE TWO-WAY RADIO PORTABLE TWO-WAY RADIO
No
Squelch level, the lower the level is easy to
interfere; the higher the level of sensitivity is
worse, it is best to set the middle.
In frequency mode, when the UP and
DOWN keys are pressed, the step value
of frequency is changed.
The radio transmits at high power.
The radio transmits at middle power.
The radio transmits at low power.
Turn off power saving mode.
Turn on power saving mode.
Turn off VOX.
VOX Level
The radio work in wideband mode
The radio work in narrowband mode.
The background light is on all the time.
Turn off the backlight automatically when
the time is up.
Turn off dual standby mode.
Turn on dual standby mode.
Turn off beep prompt
Turn on beep prompt
0,…,9
2.5KHz
5.0KHz
6.25KHz
10.00KHz
12.50KHz
20.0KHz
25.0KHz
50.0KHz
High
Middle
Low
OFF
ON
OFF
1,2,… 10
Wide
Narrow
Bright
1Sec,2Sec,
… 10Sec
OFF
ON
OFF
ON
Squelch
Step
Tx
Power
Power
save
Vox
Level
Band-
width
Back-
light
Dual
Standby
Beep
Prompt
13 14
5.Press【▲】/【▼】to select the required option (Off/On).
6.Press【MENU】key to confirm and return to the
previous menu.
Frequency Mode(VFO)
VFO mode is the basic mode for changing the operating
frequency. In the standby interface, press [VFO/MR] to
switch to VFO mode, and press 【▲】/【▼】 to increase
or decrease the frequency.
Quick Frequency Input
In addition to pressing【▲】/【▼】, you can also input
the frequency directly. If the required operating frequency
is far from the current frequency, you can use the keypad
to directly input the frequency.
●Press [VFO/MR] to switch to VFO mode.
* The frequency must be entered directly in VFO mode.
●Press the number buttons ([0] to [9]) to enter the desired
frequency（The first three decimal places are MHZ and
the last five decimal places are KHZ）.
●After entering the frequency manually, press and hold the
[PTT] button to call the contact of current frequency.
Menu list
Level 1
menu
Level 2
menu
Description of settings
0
1
2
3
4
5
7
8
6