Baoli F Series - Inspection and adjustment of engine

39
Parallel table for engine and forklift model which is coincidence and stuck with CE
label:
Engine model
The guaranteed
Sound power
level LwA(dB)
2000/14/EC
Exhausting
2004/26/EC
CE CONFORMITY
2006/42/EC
Truck model
Diesel engine
ISUZU
C240PKJ
106
StageⅢA
yes
CPCDF
20/25/30-W1
Yanmar
4TNE92
107
StageⅢA
yes
CPCDF
20/25-Y1
4TNE98
107
StageⅢA
yes
CPCDF
25/30/35-Y2
Gasoline engine
Mitsubishi
4G64
-31ZG
105
yes
CPQDF
20/25/30-H1
Nissan
K21
105
yes
CPQDF
20/25-H2
K25
105
yes
CPQDF
20/25/30/35-H3
Note: The sound power level L
WA
according to 2000/14/EC standard, the exhausting
according to 2004/26/EC standard. The forklift with gasoline engine is not referred in
2004/26/EC standard presently.
1.3 Inspection and adjustment of engine
In order to keep good condition of your truck, you must carry out periodic inspection
and adjustment of power system.
(1) Regularly clear the dust of air cleaner.
(2) Regularly replace oil filter and fuel filter.
(3) Check and apply the coolant periodically.
(4) Periodic inspection of throttle valve and injection pump.
(5) Check fan belt for tension and all fasteners.
Note:
Always check the exhaust gas of the engine during using the forklift truck. Especially
after maintaining the engine, it’s necessary to verify the discharge indicator ensure that
discharge value is fit for the national standard, so as to minimum damage to the person
and environment.
1.4 Precautions of cooling system
(1) During using the forklift truck, if the temperature of the radiator or coolant is too
high, don’t open the cap of the radiator immediately. To find the reason for boiling, use
extreme care when removing the cap, the sudden release of pressure can cause a steam
flash which would cause a serious personal injury. Lower the running speed of the engine