43R5900050 /13 ClickShare CSE-800
when you walk away from the meeting room the app will show a message indicating you probably left the
meeting room and you are still connected to the screen.
3.4 Advanced Use
Advanced functionality
Depending on the display mode, ClickShare can show the content of up to four sources (clone mode) or up to
eight source (extended mode) on the meeting room display(s) at the same time. A source can be a wireless
source, via the a ClickShare Button or either an iPad or android device sharing via the ClickShare app, or
HDMI input source. This means by clicking their Button, clicking the virtual button in the ClickShare app, four
or eight persons in the meeting room can display their screens simultaneously. They appear as follows:
For a meeting room with a single display:
1 user
1
2 users
1 2
3 users
1 2
3
4 users
4
1 2
3
Image 3–15 Position on single display
For a meeting room with a dual display in extended mode:
1 user
2 users
3 users
4 users
6 users 8 users
1
1
3
1 2
1 2
1 2 3 4
1 2
3 4
5 6
1 2
3 4
5 6
7 8
Image 3–16
When the display mode is set to extended,if you are the ninth user, you are blocked. A message appears on
your screen telling you the maximum number of users is reached. You have to wait until one other the other
users removes his content or you display your content full screen removing all the others.
For a meeting room with a dual display in clone mode:
Getting started
To Next Page
Loading...
