Barco ClickShare CX-50 User Manual

37R5900095 /13 ClickShare CX-50
Image 2–50 Audio setup
2.15 Pairing
Pairing of the Buttons with the Base Unit
To be able to use a Button it should be assigned to the Base Unit you are using. This process is called pairing.
All Buttons will need to be updated and paired before use.
In case you buy additional Buttons or when a Button should be assigned to another Base Unit, the Button
needs to be paired (again). The Button software update runs in the background and will not impact users while
using the system. When downgrading or updating to an older version of the Base Unit software the Button
need to paired manually to update their software.
A Button can only be paired to one Base Unit at a time.
The Button will always make connection to the Base Unit it was last paired to.
To pair a Button to the Base Unit by plugging in
1. Insert the Button in the USB type-C
TM
port available on the Base Unit you are using.
Image 2–51 Pair Button
The Base Unit LED is blinking while the Button LED fills up a circle. This means pairing is in progress.
Getting started

Barco ClickShare CX-50 Specifications

General

Video outputs	1x HDMI
Video inputs	1x HDMI
Ethernet	1x RJ-45
HDMI output resolution	Up to 4K UHD (3840 x 2160)
HDMI input resolution	Up to 4K UHD (3840 x 2160)
Wireless frequency band	2.4 GHz / 5 GHz
Resolution	Up to 4K UHD (3840 x 2160)