Coronis 5MP 13
Display installation
Mounting the display
USING THE SINGLE TILT & SWIVEL FOOT
The display can be mounted in portrait or in landscape orientation.
To mount the display in portrait orientation:
1 Unpack the tilt & swivel foot and place it on a solid surface.
2 Unpack the display
Figure 6: Attaching the panel to the display stand (portrait)
Prior to installing your BARCO CORONIS Display and connecting all
necessary cables, make sure to have a suitable display controller
physically installed in your computer. If you are using a Barco
display controller, please consult the user guide delivered with it
to do this.
To Next Page
Loading...
