Coronis 5MP 49
TO MANUALLY SELECT A VIDEO ENCODING MODE:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Source menu.
3 Enter the Video Encoding submenu.
4 Select one of the available video encoding modes and confirm.
Grayscale conversion modes
ABOUT GRAYSCALE CONVERSION MODES
Grayscale conversion modes specify how color generated on the display
controller is converted to grayscale in your display.
The available grayscale conversion modes are:
Use Red Channel This mode is intended for grayscale
displays where gray is sent over the red
channel.
Use Green Channel This mode is intended for grayscale
displays where gray is sent over the green
channel.
Use Blue Channel This mode is intended for grayscale
displays where gray is sent over the blue
channel.
Use All Channels This mode is intended for grayscale
displays where gray is sent over the red,
green and blue channel. This done by
means of a standard conversion
mechanism where 30% red, 59% green
and 11% blue are used to generate gray.
To Next Page
Loading...
