Barco Coronis 5MP - Video Input Signals

Coronis 5MP 47
TO SET THE DISPLAY ORIENTATION:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Sources menu.
3 Enter the Display Orientation submenu.
4 Select Landscape/Portrait/Automatic as desired and confirm.
Video input signals
ABOUT INPUT SIGNALS
The available input signals for your display are:
TO MANUALLY SELECT A VIDEO INPUT SIGNAL:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Source menu.
3 Enter the Input Signal submenu.
4 Select one of the available input signals and confirm.
DisplayPort 1 The input corresponding to the DisplayPort
connector.
DVI 1 The input corresponding to the DVI
connector.
Automatic Selection The input is automatically selected.