Barco DP2K-23B User Manual

R5905753 /17 DPxK-19B/23B/P28
instructions see chapter “ICMP(-X)”, page 97, and user guide of the Communicator and/or (Web)
Commander.
In case the projector is equipped with a HD-SDI input module apply a single or dual channel SMPTE (HD-
SDI) source to the input ports of the HD-SDI input module and start up the projector. See chapter “Input &
communication”, page 77. Use the Communicator (Touch Panel) to configure the applied source. See the
user guide of the Communicator (Touch Panel) for more detailed information.
In case the projector is equipped with an Integrated Media Block (IMB) or Integrated Media Server (IMS)
see user guide of the IMB or IMS for detailed instructions.
General

Barco DP2K-23B Specifications

General

Contrast ratio (typical)	2000:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
AC input voltage	200 - 240 V
Lamp power	4000 W

Weight and Dimensions

Depth	754 mm
Width	604 mm
Height	1129 mm
Weight	133000 g