Barco R9002380 - Contrast Enhancement; What Can be Done; How to Select and Adjust the Contrast Enhancement; Advanced Settings

7-9
5976066 BARCOCINE 7 07022000
Random Access Adjustment Mode
Select with é or ê
then <ENTER>
<EXIT> to return.
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
ADVANCED SETTINGS
Contrast
Enhancem.
-3 +30
Select with é or ê
then <ENTER>
<EXIT> to return.
Select with é or ê
then <ENTER>
<EXIT> to return.
LINE MULTIPLIER
TIME BASE CORRECTION : ON
LUMINANCE DELAY
V SYNC REF : INDIRECT
CLAMP GATING : OFF
FACTORY PRESET
WARNING : ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING : ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
ADVANCED SETTINGS
Select with é or ê
then <ENTER>
<EXIT> to return.
LINE MULTIPLIER
TIME BASE CORRECTION : ON
LUMINANCE DELAY
V SYNC REF : INDIRECT
CLAMP GATING : OFF
FACTORY PRESET
WARNING : ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Contrast Enhancement
What can be done ?
Enhancing the contrast results in a more dynamic image.
How to select and adjust the contrast enhancement ?
1 Push the cursor keys é or ê to select 'Contrast Enhancement' (menu 1).
2 Press ENTER to display the adjustment text box (menu 2).
3 Push the cursor keys é or ê to adjust the contrast.
4 Press ENTER to return to the 'Image Processing' menu.
menu 1
menu 2
Advanced Settings
How to select the Advanced Settings ?
1. Push the cursor key é or ê to select 'Advanced Settings' (menu 1).
2. Press ENTER to select.
The advanced Settings menu will be displayed (menu 2).
A warning is displayed in the advanced settings menu : "Advanced adjustment should be performed only by qualified personnel".
menu 1
menu 2
menu 1
Time Base Correction
Why Time Base Correction ?
With the Time Base Correction function it is possible to clean-up low quality videotape noise to obtain a more stable image.
How to activate ?
1 Push the cursor keys é or ê to select 'Time Base Correction' (menu 1).
2 Press ENTER to toggle between ON and OFF.