Barco RLM-W14 - 3-2. Troubleshooting & Error Code

RLM W14 08/20/2014
27
4. Input & Communication
12V Trigger connection
If your home theatre system includes a projector screen, screen cover or other 12V Trigger equipment, please connect
such device/equipment to the projector’s 12V Trigger output as illustrated.After you have done so, Your screen will lower
automatically whenever you turn on your projector for your convenience.
200mA
Tip = +12V
Sleeve = Ground
Retractable screen or other
12V device
RGBs connection
f the source equipment uses composite image synchronized connectors to output VGA, please connect the green, blue and
red connectors to the Y, Pb, Pr jacks at the COMPONENT1/SCART inputs and the synchronized output to the VIDEO jack.
200mA
Green Blue Red
DVD player or other SCART
RGBS input sources