B. Cleaning the dust filters
B.2 Dust filter on the back side
Necessary tools
• Flat screwdriver
• Philips screwdriver
What should be done
To get access to the dust filters, the back cover must be removed.
How to remove
1. Loosen the 3 screw on the back side. (image B-6)
2. Take off the cover.
3. Turn out 2 times 4 screws to remove both dust filters on the back side of the cover. (image B-7)
4. Take out the dust filters.
5. Turn out the 4 screw on the bottom side and take out the dust filter. (image B-8)
Image B-6
Back cover removal
118 R5976654 SLM R12+ 09022004
To Next Page
Loading...
