7. Random Access Adjustment Mode
How to set up the desired aspect ratio ?
1. Push the cursor key ↑ or ↓ to highlight Aspect R atio. (menu 7-46)
2. Press ENTER to scroll between [5:4], [4:3], [16:9], [2.35], [1.88] or [1.78].
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-46
7.4.8 Geometry Options
What is possible
Thesamesidekeystonecorrectioncanbeusedforallfiles.
How to toggle
1. Push the cursor key ↑ or ↓ to highlight Options. (menu 7-47)
2. Press ENTER to select.
The Geometry Op tions menu will be displayed. (menu 7-48)
3. Press ENTER to toggle between [YES] or [NO].
NO Side Keystone will be adjusted for the active file only.
YES Side Keystone will be adjusted for all files.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-47
GEOMETRY OPTIONS
Use the same side
keystone correction
for all files ?
[YES]
<ENTER> to toggle
<EXIT> to return
Menu 7-48
7.5 ScenergiX
Overview
• Order information
• Introduction
• Preparations
• Scenergix
• ScenergiX overlap zone (horizontal scenergix)
• ScenergiX overlap zone (vertical scenergix)
• ScenergiX size adjustment
• Adjusting the black level of the images
68
R5976654 SLM R12+ 09022004
To Next Page
Loading...
