143R5911443 /11 UDM
Image 10–15 Example of the WiFi menu
2. Make sure the Enable slider is set to the right to enable the WiFi module. The color of the slider becomes
blue.
3. Make sure the Automatic slider is set to the right to automatically assign an IP address.
4. Use the Select Network button to select the desired network from the available list.
Image 10–16 Example of the available networks list.
Tip: If the desired wireless network is not in the list or hidden by default, select Other network. A
form will pop up, allowing you to fill in the details of the network.
Image 10–17 Example of the entry form to search for other wireless networks
5. If required by the chosen wireless network fill in the user name, password and confirm.
GUI – System Settings
To Next Page
Loading...
